TM-1014

TM-1014 AC Clamp Phase

This apparatus conforms to safety standard EN 61010

Application

It can be used for CURRENT, VOLTAGE and FREQUENCY measurements on installations of surge voltage category III up to 600 V, voltage between Phase and Earth (fixed installations) and for current measures up to 400A.

Features

The apparatus can perform the following measurements:

AC current (I_AC).
AC voltage (V_AC).
DC voltage (V_DC).
DC current (I_DC).
Resistance.
Continuity Test.
Frequency
Diode test

Specifications

Display:3 ¾ LCD with maximum reading 3999 units plus decimal point signs plus backlight
Sample rate:2 times/sec.20 times/sec. for analogical bargraph
Conversion mode:mean value
Jaws opening:30mm
Max conductor size:30mm
Dimension: 205mm(L)x64mm(W)x39mm(H).
Weight:about 280g. (Including battery)

CHARACTERISTICS SPECIFICATIONS(23℃±5℃, below 75％RH )

DC Voltage
Range	Resolution	Accuracy	Input impedance
400mV	0.1mV	±(0.8%rdg+2dgt)	100MΩ
4V	1mV		11MΩ
40V	10mV		10MΩ
400V	100mV
600V	1V	±(1.0%rdg+2dgt)

AC Voltage
Range	Resolution	Accuracy (50~500Hz)	Input impedance
400mV	0.1mV	±(1.0%rdg+50dgt) (at 40Hz-60Hz)	100MΩ
4V	1mV	±(1.0%rdg+3dgt)	11MΩ
40V	10mV		10MΩ
400V	100mV
600V	1V	±(1.2%rdg+3dgt)

AC Current
Range	Resolution	Accuracy (50 ~ 60Hz)	Overload protection
40A	0.01A	±(2.0%rdg+10dgt)	600A rms (60 seconds)
400A	0.1A	±(1.5%rdg+10dgt)(0.1 – 40A) ±(1.5%rdg+3dgt)(40.1 – 400A)	600A rms (60 seconds)

Resistance
Range	Resolution	Accuracy	Max. Open Loop voltage	Overload protection
400Ω	0.1Ω	±(1.0%rdg+5dgt)	about 1.5VDC	600Vrms (60 seconds)
4KΩ	1Ω	±(1.0%rdg+3dgt)	about 0.45 VDC
40KΩ	10Ω
400KΩ	100Ω
4MΩ	1KΩ
40MΩ	10KΩ	±(3.0%rdg+3dgt)